Epson Toyocom's U.S.-Based Timing Products Division Announces Development of GHz-Band, High-Stability SAW Oscillators with Low P

) October 14, 2008 -- Epson Toyocom Corporation's U.S.-based Timing Products Division has announced the development of two new models of low phase-noise, low-jitter SAW oscillators that output GHz band (800 MHz - 2.5 GHz) frequencies at the fundamental. Commercial development is scheduled for completion in the first half of 2009.

The newly developed oscillators are the single-output EG-9000GC and the voltage-controlled EV-9000GB. The low phase noise, low jitter and excellent frequency-temperature coefficient characteristics of the oscillators are achieved by the built-in NS-34R crystal-oscillating element. The NS-34R boasts a high Q value, low insertion loss, high power durability, and an outstanding frequency-temperature coefficient, in addition to Epson Toyocom's unique high-frequency circuit technology.

Phase noise is mitigated in the low offset frequency range (roughly 500 kHz up to 1.5 MHz) by taking advantage of the high Q value of the NS-34R. Phase noise is mitigated in the high offset frequency range (from roughly 500 kHz to 1.5 MHz or more) by taking advantage of the NS-34R's high-power durability characteristics to raise the level of signals in the oscillation loop. The oscillators boast an extremely stable frequency-temperature coefficient that is 1/5 that of a conventional dielectric resonator oscillator and 1/3 that of an oscillator employing an STW (surface transverse wave) crystal.

The EG-9000GC and EV-9000GB will help provide performance gains in applications that require high frequencies and a highly stable clock (one with low phase noise, low jitter, and an excellent frequency-temperature coefficient). Communications and measurement applications will be particular beneficiaries. These oscillators are expected to contribute to the discovery of new technologies and the development of new products in applied microwave technology markets.

Main Features

  • Support fundamental frequencies from 800 MHz to 2.5 GHz
  • Low phase noise and low jitter due to newly developed SAW resonator that provides both a high Q value and high power durability
  • Highly stable oscillations due to new resonator's superior frequency-temperature coefficient
  • Low power design (3V and 35mA)

About Epson Toyocom Corporation
Epson Toyocom Corporation (Epson Toyocom) is the global leader in quartz devices. Epson Toyocom maintains its leadership position through technological innovation and expertise in three critical device categories -- timing, sensing, and optical devices; and through the development of combinations of products in each of these segments. The company and its more than 12,000 employees market its products to customers worldwide through sales and marketing affiliates around the world including Epson Electronics America, Inc. in El Segundo, California.

About Epson Electronics America, Inc.
The Timing Products Business Unit of Epson Electronics America, Inc. (EEA) is the North American sales, marketing, and engineering arm of Epson Toyocom Corporation (Epson Toyocom) and provides a wide array of crystals, oscillators, real-time clock modules, SAW products, optical devices and gyro sensors. Based in El Segundo, California, the EEA group has more than 40 sales representative offices nationwide and a growing network of exclusive distributors. For more information, please visit www.eea.epson.com and click on the Epson Toyocom center box. Both Epson Toyocom and EEA are part of the Seiko Epson Group, which consists of 109 companies around the world.

###

Similar entries

  • New Line Affords Performance at Unprecedented Levels (PRWeb Sep 21, 2009)

    Read the full story at http://www.prweb.com/releases/technology/nanotechnology/prweb2914304.htm

  • ) January 28, 2009 -- Ecliptek Corporation is pleased to announce that the frequency range for its line of high frequency LVDS and LVPECL ceramic surface mount 5mm x 7mm oscillators is being increased to 312.500MHz.

    Ecliptek EL15C7 Oscillator

  • ) February 3, 2009 -- Ecliptek Corporation is pleased to announce the addition of several new frequencies for its line of high frequency 3.3VDC LVDS and LVPECL ceramic surface mount 5mm x 7mm voltage controlled oscillators (VCXO).

    E32D1 Series Oscillator

  • ) February 10, 2009 -- Ecliptek Corporation is pleased to announce the addition of four new high frequency LVDS and LVPECL ceramic six pad surface mount low profile 3.2mm x 5.0mm crystal controlled oscillators (XO). These new products complement Ecliptek's extensive offering of quartz and MEMS frequency control products.

    Ecliptek E13C5 Miniature LVPECL Clock Oscillator

  • ) October 1, 2008 -- Ecliptek Corporation announces the expansion of their EMO™ family of MEMS oscillator products to include a new MEMS spread spectrum low EMI output surface mount oscillator, the EMS series

    Ecliptek MEMS Spread Spectrum Oscillator

  • June 3, 2008 --
    All around the net, there isn't anything this good. if you're a bulk printer, you will definitely need this...Concord Supplies provides its customers with high quality printer ink cartridges, printer toner, and printer supplies. Need an original OEM printer ink cartridge? How about saving money with a compatible printer ink cartidge. Regardless of the one you pick, we have the printer ink supplies to meet your need. Choose from over 7,000 printer ink items from brand names including: HP, Epson, Canon, Lexmark, Dell, and numerous other brands.
    Save up to 65% on ink from HP, Epson, Lexmark, Canon & other major printer ink brands from ConcordSupplies.com
    Visit our site:

  • ) November 22, 2008 - Condé™ Systems has introduced the DyeTrans™ GX7000, the first non-Epson desktop ink jet sublimation transfer printer supported by Condé Systems. A faster and simpler counterpart to the DyeTrans 1400, the new DyeTrans GX7000 is an extremely cost-effective printer that boasts amazing image quality, an incredibly fast print speed, and up to three separate paper trays. "For years, customers have been asking for printer alternatives in the Epson-dominated desktop sublimation industry," said David Gross, President of Condé. "We're very excited to now offer our customers the heavy-duty, expandable, and fast DyeTrans GX7000."

  • ) September 11, 2009 -- Condé Systems is now offering the ChromaBlast-R Professional Cotton Decorating System for the Ricoh GX7000 ink jet printer - a very fast, low cost, and reliable desktop system for producing customized wearables with extreme color, an incredibly soft image feel, and unmatched washability.

  • Fox Electronics has published an updated brochure for its cost-effective, low jitter XpressO crystal oscillators, which are now available in smaller package sizes and lower voltage options.

  • ) October 26, 2008 -- PhaseLink Corporation, a leader in frequency source generation and the inventor of the Analog Frequency Multiplier (industry's best performing clock IC), and PicoPLL (world's smallest and lowest power programmable clocks) today announced the availability of the newest member of PhaseLink's extensive PicoPLL clock family, PL613-XX.

  • ) December 4, 2008 -- ConeColor today announced new ink solutions for users of Epson large-format printers enabling them to both cut ink costs and reduce impact on the environment.

    ConeColor 236ml bottle and Reusable Cart

    The Ink
    The new ConeColor ink line for Epson 2400, 3800, 4800, 7800 and 9800 printers now includes a new Vivid option for Epson 2880, 4880, 7880, and 9880 printers at less than 1/3 the cost of OEM solutions.

  • ) January 18, 2009 -- PhaseLink Corporation, a leader in frequency source generation and the inventor of the Analog Frequency Multiplier (industry's best performing clock IC), and PicoPLL (world's smallest and lowest power programmable clocks) today announced the availability of the newest member of PhaseLink's PicoXO clock family, the PL

  • There are many critical applications that depend on temperature regularity. A reliable solution for monitoring and recording temperature data in industrial applications, as well as in transportation and logistic systems, food, agricultural and medical applications and cold storage systems is therefore required. One RF Technology offers an easy-to-implement wireless temperature monitoring system that can be operated license-free.

  • ) February 25, 2009 -- Including SMD package sizes as low as 2.5mm X 3.2mm x 0.7mm, Ecliptek's comprehensive family of miniature surface mount quartz crystals reduce board space requirements, making them the preferred solution for hand held and portable devices.


    With multiple package and pad layout combinations, Ecliptek SMD crystals provide maximum flexibility for challenging board layouts. Available in fundamental and third overtone modes, these devices are offered over the frequency range of 3.579545MHz to 70.000MHz across the various package configurations.

  • single longitude mode, high power stability, high quality beam mode, low noise, long mean time of no erro

  • ) September 22, 2008 --
    Despite the proliferation of electronics devices that integrate voice,
    music, and video, the quality of sound produced by these handheld
    electronics has not lived up to consumer expectations. Analog Devices,
    Inc., (ADI) well-known to audiophiles for its high-fidelity audio
    technology, has created a microphone capable of high-fidelity
    audio/video playback, conference calling, TIA-920-compliant VoIP
    (voice-over-IP), voice recognition, and other functions. ADI combined
    audio applications know-how with MEMS (micro-electromechanical systems)
    technology to design a new family of microphones with the industry’s
    highest SNR (signal-to-noise ratio) of greater than 61-dB A-weighted.

  • ) March 26, 2009 -- With the success of its beta launch of myRT Mobile Japan (http://myrt.auriq.com/mobile/jp), with over 2000 registered users and over 40 million visits per month in less than a year, AuriQ Systems is venturing into the US mobile web analytics market. myRT Mobile US provides mobile marketers and site owners key insights about their mobile web visitors including which carrier networks they use, types of devices, and their capabilities.

  • ) October 6, 2008 --
    TriQuint Semiconductor (NASDAQ:TQNT), a leading RF products
    manufacturer and foundry services provider, today announced that the
    Office of Naval Research (ONR) has awarded TriQuint a 21-month, $4.5
    million contract to advance manufacturing methods used to produce
    high-power, high-frequency gallium arsenide (GaAs) amplifiers. TriQuint
    was chosen based on its experience developing high-performance,
    high-reliability amplifiers for a wide range of defense and aerospace
    applications, according to Dr. David Fanning, TriQuint Contract Program
    Manager.

  • ) April 24, 2009 -- A global leader in Integrated Passive Devices (IPD), OnChip today introduced a miniature Thin Film Silicon wire-bondable Resistor Chip that can offer a wide range of values. Using advanced thin-film manufacturing techniques and featuring high-stability, self-passivating and moisture-resistant Tantalum Nitride resistor elements, this product is ideal for developing quick-turn proto-types in the hybrid microelectronics labs. The multi-tapped 110R Series Resistors provide great flexiblity to hybrid circuit designers. Consisting of a string of 20 resistors, these chips can be wire-bonded to offer a wide range of resistances. Measuring a size of 34 x 34 mils sq., the 110R consists of twenty one wire-bond pads.

  • ) May 15, 2009 -- CS&A LLC (Consulting Services and Associates LLC) announced the publication and release of the CY2008-2009 Semiconductor Clock and Timing Market Reports (3).


    CS &A maintains a specific focus upon specific analog mixed signal semiconductors providing consulting efforts and market reports / analysis covering Semiconductor Timing, Power Management and Test/Instrumentation.

  • August 8, 2008 --
    Printerland, the UK's largest independent value added printer reseller, is celebrating reaching dual milestones. It has had its 1000th customer through the doors of its printer demonstration centre and A3 sales have seen a tenfold increase.
    The demonstration centre, housing an extensive range of printers, allows Printerland to assist customers in finding the most suitable product. Importantly, it offers an opportunity for Printerland staff to interact face to face with customers.

  • ) April 13, 2009 -- Also called Plastic Electronics, Organic electronic deals with organic polymers or plastics that are conductive in nature. These polymers are called 'organic', as they are made from carbon-based molecules. This is in contrast to conventional electronics, which feature inorganic metal conductors such as silicon or copper. Key factors driving penetration of organic electronics in the mainstream market are its low cost for fabrication and high degree of flexibility.

  • Westboro, MA - ArriveNEWS.com, organizer of on-line industrial-focused trade shows, announced to the media last night the company will include a variety of data acquisition and signal conditioning products as part of the International Industrial Trade Show (IITS). According to Cynthia Hughes, the expo is expected to attract thousands of industrial buyers and suppliers worldwide showcasing and exploring a wide range of innovative products for manufacturing, engineering and technical applications.

  • August 14, 2008 --
    Orchid Technologies Engineering & Consulting, completes the development of a ruggedized power supply for use in demanding avionics applications.
    Working closely with component vendors, Orchid Technologies delivered a highly reliable, light weight, 150,000 Hour MTBF solution, for its avionics client.
    “The high output voltage stability with low current noise was essential over the entire operating range of this design,” Said Paul Nickelsberg, President and Senior Engineer for Orchid Technologies. “Optimization of power supply size and weight were critical to the success of this ruggedized power supply.”

  • ) February 4, 2009 -- A global leader in Integrated Passives Devices (IPD), OnChip today introduced a family of Thin Film Silicon wire-bondable Resistor Chips. These products use sophisticated thin-film manufacturing process featuring a high-stability, self-passivating and moisture-resistant Tantalum Nitride resistor element. Consisting of a single and dual value resistors, these chips offer a very wide range of resistances and tolerances. Additionally, these devices provide low shunt capacitance and low-noise operation which are ideal attribues for use in high performance hybrid microelectronics. The single value resistors TX & TL Series Resistors have a very small die size of 20 x 20 mils. Sq..

  • LCR Electronics now offers a line of single phase COTS (commercial-off-the-shelf) filters that operates over an extended temperature range of -40°C to +85°C (-40°F to +185°F).

  • ) February 13, 2009 -- The company sees the development of smart phone solutions for the service, maintenance and construction market as the key to growth. "It is more than being web-based", commented Wayne Viener. "It is the ability to use the software on any web-enabled cell phone. We have the scale, speed and architecture worked out. All you need to do is hit the web portal, type in your user credentials and go to work."


    Connie Beach continues the thought, "All you need is a cell phone and an Epson Bluetooth printer. Actually, any Bluetooth printer will work." Ms. Beach went further: "So you now have the power of CounterPoint and CounterSolutions in your hand for at a very affordable price point."

  • ) March 19, 2009 -- HBM announced today that it has launched Genesis HighSpeed - a new product line for high-speed data acquisition and transient recording. The Genesis HighSpeed product family - formerly sold under the "LDS Nicolet" brand - enhances HBM test and measurement solutions by expanding the addressed frequency range and provides a full range of high-end data acquisition (DAQ) instrumentation.

    HBM's Genesis HighSpeed product family

  • July 18, 2008 --
    Leading VAR Printerland is to implement an ambitious acquisition plan to further strengthen its leading position in the printer market.
    Printerland is actively seeking out opportunities for strategic alliances and acquisitions, in particular targeting other smaller printer specialist dealers.
    The development comes as the Altrincham based printer reseller is making significant strides and showing strong annual revenue growth far exceeding the rest of the market.
    And by investing in local talent and facilities Printerland’s managing director, James Kight, aims to reach a turnover target of £20m by 2010.

  • ) January 7, 2009 -- LigoWave announces today the execution of a distribution agreement granting Streakwave Wireless Inc. the right to market and distribute the full LigoWave wireless networking product line throughout the United States and Canada.

    LigoWave_Streakwave

    Streakwave brings a whole new level of value proposition to the wireless industry

  • ) November 9, 2008 -- Guardair Corporation announces the new Quiet Force Nozzle. Developed by Boeing engineers the patented Quiet Force Nozzle delivers high-power at low-noise levels thereby setting a new standard for cleaning with compressed air.

    INF5048AQF

  • ) September 24, 2009 -- Emerson Network Power, a business of Emerson and the global leader in enabling Business-Critical Continuity™, today launched its latest high-efficiency AC-DC power solution, the LPT100-M series. The power supplies features both information technology equipment (ITE) and non-patient contact/critical medical safety approvals, making them ideal for use in ITE and light industrial systems, as well as equipment intended for non-patient contact and non-patient critical use in low power medical, dental and laboratory applications.

  • Magnetic Analysis Corporation, originator of the spinning probe rotary eddy current tester, introduces the ROTOMAC 9 nondestructive test system. The latest in MACs line of rotary testers, this technology is the method of choice to detect long, seam-type defects in wire, tubing, or bar stock. Hot rolled and cold finished product can be tested in-line as part of a production process (such as cold drawing), or as a separate test operation.

  • ) September 30, 2008 -- Until today, maintaining controlled room temperature (CRT), 20-25°C, for a package during shipment has never truly been possible. Companies and government organizations shipping small quantities or single doses of temperature-sensitive products (like pharmaceuticals or clinical trials) have found it difficult to maintain CRT during transit. Industry-wide state and federal regulatory commission standards require CRT regulation as part of a company's temperature-sensitive shipping operations. However, due to the lack of adequate technology on the market, complete compliance has been difficult to achieve.

  • ) January 19, 2009 -- Chatsworth Products, Inc. (CPI), a leading manufacturer of systems designed to organize, store and secure IT infrastructure equipment has expanded its Power Management Product line with the addition of new high power Single- and Three Phase PDU Power Strips.

    New Three-Phase PDU Power Strip

  • ) July 7, 2009 -- Oshyn, Inc., www.oshyn.com, an Enterprise Technology Agency with a reputation for delivering innovative business solutions for the web, mobile devices and enterprise technology platforms, announced today that it will offer introductory pricing to select customers who want to use the iPhone 3.0 to as part of their mobile media strategy. Clients who sign an iPhone development contract in July of 2009 will receive preferential pricing amounting to a 50% savings in related project fees.

  • High Energy Corporation’s new CHGOIL5XXX and CHLOIL5XXX series capacitors have substantially higher power ratings and greater dependability than other capacitors.

  • ) July 21, 2009 -- A CTV News story recently highlighted the global interest in SHEC Energy's ultra-high efficiency solar thermal power technology. After years of intensive research and development, SHEC Energy is ready to commercialize its patented technology to deliver large-scale renewable solar power.


    SHEC Energy has participated in trade missions sponsored by the Canadian Export Development Corporation, United States Department of Energy, the US Department of Commerce and the Saskatchewan Trade and Export partnership resulting in a number initiatives for energy projects in Mexico, the United States, India, Africa, Europe and the Middle East.

  • ) June 23, 2009 -- A.T. Wall Company (http://www.atwall.com/atwall/), a world-class supplier of superior precision tubing and fabricated metal components, featured a range of precision-drawn, high-quality Waveguide tubing at the 2009 International Microwave Symposium (IMS), June 7th-12th, at the Boston Convention & Exhibition Center in Boston, MA. Highlighted products included Invar waveguide, thin wall aluminum waveguide, and seamless flexible waveguide.